GSM RELAY var.2 - Remote controlling via GSM

Interfaces of GSM Relay 2

- 3x inputs for sensors

- 2x outputs for rmote control of devices

- 1x internal temperature sensor

- 1x external temperature sensor socket

- 1x internal magnetic contact (reed contact) located inside of the GSM RELAY

Description
GSM RELAY was originally designed as a device for a remote control of one electrical appliance via SMS on GSM network, which is very easy to install and use. Just plug the GSM RELAY in the power outlet (230 V), connect your electrical appliance and send SMS to switch ON or OFF the output power outlet on the GSM RELAY. There is also only one input ? magnetic reed contact on GSM RELAY.
GSM RELAY 2 is an advanced version of GSM RELAY with more outputs and inputs. The new features are remote temperature control, capability to control connected device just by ringing from a mobile phone, four inputs for event messages and alarms. GSM RELAY 2 has 2 analog inputs for temperature sensors (one internal and one external), 2 additional outputs besides main power output and an internal memory to keep parameters and status even after power failure. Inside of the GSM RELAY 2 is located a magnetic contact (reed contact) which act as a simple security device. Just connect GSM RELAY 2 into 230 V power socket before your electrical appliance which you need to control. Now it is possible to switch ON/OFF or interrupt the electric power supply into your appliance remotely via SMS. GSM RELAY 2 can automatically control your heating system on a requested temperature. The status of connected inputs is possible to readout using SMS. It is possible to set up GSM RELAY 2 to send SMS message whenever any input changes.

Use of GSM RELAY 2

• Houses, bungalows - remote control of heating, water heating, air conditioning, remote control of thermostat, gate opening.
• Event reporting - opening of doors, windows, alarm.

 Advantages of GSM RELAY 2

• Simple installation - only plugging in into the wall socket without any necessity to make changes in networks.
• Easy control - just send a SMS message in the required form from your mobile telephone or from Internet.
• Plug & Play type device - basic settings are done in production, no complicated settings are necessary, just insert the SIM card and plug into the wall socket.
• Settings on the SIM card - can be easily modified by editing the directory in any mobile telephone.
• Logical inputs - enable a call or sending a SMS to the users when an input state is changed (e.g. alarm activation). The coil or magnet is ordered separately.
• Events history - User?s activity is recorded in a SIM card.
• Heating control to desired temperature sent by SMS - if desired temperature is higher than actual temp. the selected output is switched on.
• Remote control by calling the device phone number - open an entry gate or a garage door by calling from your mobile telephone, no charge for refused call.

Technical Data

• Voltage: 230 V (+/- 10%)
• Internal consumption: max. 0.8 W (idle) / 1.5 W (active)
• Operating temperature: -20°C to +40 °C
• Outputs: El. Power socket: 1x230V/10A
• Inputs:Magnetic contact: 1x
• Logical outputs: 2x60 V,100 mA *)
• Logical inputs: 3x8 V to 30 V, 5 mA *)
• Temperature sensor: KTY81 - 50 °C to +150 °C
  *) The number of inputs and outputs at the connector can be changed on customer request for an extra charge.